EPM-50 Mono (two units)

Monophonic power amplifier with 50 W

Beautiful for the eyes and ears, this model reaches qualitative levels normally associated with the best valve amplifiers, providing greater control and power.

The power supply (independent for each channel) is based on a 250 W toroidal transformer of very low-noise and low dispersion, high-speed schottky rectifying diodes and a CRC filter with Panasonic metal oxide resistors, Wima polyester capacitors for RFI/EMI removal and electrolytic capacitors with very low resistance with a total capacity of 132,000 uF.

Handcrafted power amplifier, welding the components manually on the printed circuit board using tin and silver alloy. Once the PCBs are finished, they are assembled in the monobloc aluminum anti-vibration chassis (independent for each channel) and their parameters are ajusted at intervals of time until reaching the maximum working temperature and, thus, achieve the most optimal result.

The equipment comes standard with gold plated connections. Optionally, the customer can choose the color of the box in black, silver or red.

EPM-50 Technical Specifications (unit)

(measured at 230 VAC with a 8 Ω load)

• Input impedance: >10 kΩ (RCA), >25 kΩ (balanced)
• Frequency response: 2 Hz – 100 kHz (-2 dB)
• Output power: 50W @ 0,074% THD, 8 Ω
• Gain: 20 dB (balanced), 26 dB (unbalanced)
• Damping factor: 50
• Power consumption: 200 W
• Fuse: Slow 2 A (230 VAC)
• Dimensions (L x W x H): 300 x 430 x 90 mm
• Weight: 25 Kg
• Warranty: 3 years

Note: the image and color shown may differ from the original