Monophonic power amplifier with 50 W per channel.
Beautiful for the eyes and ears, this model reaches qualitative levels normally associated with the best valve amplifiers, providing greater control and power.
The power supply (independent for each channel) is based on a 250 W toroidal transformer of very low-noise and low dispersion, high-speed schottky rectifying diodes and a CRC filter with Panasonic metal oxide resistors, Wima polyester capacitors for RFI/EMI removal and MLytic series Mundorf electrolytic capacitors with very low resistance with a total capacity of 132,000 uF.
Handcrafted power amplifier, welding the components manually on the printed circuit board using tin and silver alloy. Once the PCBs are finished, they are assembled in the monobloc aluminum anti-vibration chassis (independent for each channel) and their parameters are ajusted at intervals of time until reaching the maximum working temperature and, thus, achieve the most optimal result.
The equipment comes standard with Furutech connections. Optionally, the customer can choose the color of the box in black, silver, red, blue or champagne.
EPM-50 Technical Specifications
(measured at 230 VAC with a 8 Ω load)
- Input impedance: >10 kΩ (RCA), >25 kΩ (balanced)
- Frequency response: 2 Hz – 100 kHz (-2 dB)
- Output power: 1W @ 0,074% THD, 4 Ω // 60 W @ 1% THD, 4 Ω // 90 W @ 3% THD, 4 Ω
- Gain: 20 dB (balanced), 26 dB (unbalanced)
- Damping factor: 50
- Power consumption: 200 W
- Fuse: Slow 2 A (230 VAC)
- Dimensions (L x W x H): 300 x 430 x 90 mm
- Weight: 25 Kg
- Warranty: 3 years
Note: the image and color shown may differ from the original